Audi A4, S4

since 2000 of release

Repair and car operation



Audi A4, S4
+ Introduction
+ Governing bodies and receptions of safe operation
- Current leaving and service
   Specifications
   Indicator of term of approach of maintenance
   Schedule of routine maintenance
   General information on control
   Check of levels of liquids, control of leaks
   Check of a condition of tires and pressure in them. Designation of tires and disks of wheels. Rotation and replacement of wheels
   Replacement of impellent oil and oil filter
   Checks of brake system. Adjustment of the parking brake
   Check of fuel system
   Check of a condition and replacement of hoses of an impellent compartment, localization of leaks
   Check of a condition of ridge belts of a streaming drive of auxiliary units
   Check of functioning of system of cooling and frost resistance of cooling liquid
   Check of a condition of system of production of the fulfilled gases
   Check of level of oil of automatic transmission
   Visual control of a box of gear shifting and the main transfer on leaks, check of level and oil addition
   Condition check suspension bracket and steering component
   Check of a condition of protective covers of power shafts
   Check of level of liquid of system of hydrostrengthening of a wheel
   Check of central air of air
   Greasing of limiters of doors, cylinders of locks, hook of a cowl, movable panel of the hatch of a roof
   Visual control of a seat belt and safety cushion block
   Check of operability of headlights and horn
   Condition check, adjustment and replacement of brushes of screen wipers
   Check of a condition of the battery, care of it and charging
   Replacement of the battery of emergency supply of Telematik system
   Replacement of an element of the filter of air of salon / coal filter of purification of air
   Replacement of brake liquid
   Check and replacement of spark plugs. Check of a condition of high-voltage wires
   Replacement of an element of the air filter of the engine
   Replacement of the fuel filter
   Check of a condition and tension of a gear belt
+ Engine
+ Systems of cooling, heating and air conditioner
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling, power shafts and differential
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


f6be02a9 cam chat

Check of level of oil of automatic transmission

Check of level of liquid

 PERFORMANCE ORDER

    Liquid level is measured in automatic transmission at the heated-up engine and a transmission. For warming up of the power unit to necessary temperature you can make short (15 kilometers) a trip. Place the car on a horizontal surface, reliably tighten the hand brake. For reliable fixing of the car enclose under prop wheels. Get the engine and leave to work at single turns. Press a pedal of a brake and accurately move the selector from situation P to situation 1, then back to the River.

5-step automatic transmission 01V

 PERFORMANCE ORDER

    Turn out a stopper of a jellied opening (the shooter on an accompanying illustration).
    Check oil level. Level of oil should reach the bottom edge of a jellied opening. Tighten a stopper of a jellied opening (shooter) the moment 30Нм, having established a new sealing ring.
    Turn out at the left at a check point a stopper of a jellied opening (the shooter on an accompanying illustration).
    Check oil level. Level of oil corresponds to demanded value if it does not reach 8.5 mm a jellied opening. Tighten a stopper of a jellied opening the moment 20Нм.

Behind on a cowl there can be a sticker with marking and date of replacement of oil. Bring new data in a sticker or make the new.

If oil level too low, check a check point on tightness, if necessary, repair (work HUNDRED). It is not enough to fill in only oil in a check point. It is necessary to watch its correct level! It is not necessary to fill in too much oil by no means.

    Establish into place the bottom cover of an impellent compartment, address to the Section Removal and installation of the top cover of the engine / the bottom protection of an impellent compartment/stretcher. Lower the car on wheels.