Check of level of liquid of system of hydrostrengthening of a wheel Periodically check liquid level in system of hydrostrengthening of a wheel in order to avoid emergence of problems with management of the car, such, as damage of the steering pump. Level of oil is necessary for checking in cold or warm (not above + 50 °C) an engine condition.
|
|
Do not hold a steering wheel turned against the stop in this or that party more than five seconds. It can put out of action the steering pump. |
The tank of system of hydrostrengthening of a wheel is located in an impellent compartment and has an unscrewing cover with built in in it measuring the shchupy.
|
|
Park the car on an equal platform and cock the parking brake. Establish forward wheels in situation "directly".
|
Unscrew a tank stopper for oil. Wipe the level index on a cover pure, not razlokhmachenny, a rag.
|
|
Screw and again unscrew a cover by hand. Level of oil should be on 2 mm above or MIN marks are lower.
|
|
Add in system surely only pure oil since even insignificant pollution can result in malfunctions in hydrosystem work.
Screw a tank cover by hand.
|
|
Check at working temperature of the engine
|
|
Warm up the engine and stop it. Oil should get warm to temperature + 50°С.
Let's work to the engine on single turns and establish wheels directly.
Check oil level at the working engine. Oil level at a wrapped up stopper should lie between MIN and MAX labels.
|
|
|
