Audi A4, S4

since 2000 of release

Repair and car operation

Removal and installation of a forward seat belt

Removal

PERFORMANCE ORDER

At a detachment of cables of system of a safety cushion surely observe security measures at the address with a safety cushion, address to the Section General information and security measures.

Remember the provision of installation of a seat belt since there can be various options.

To exclude operation a head safety cushion, switch off ignition and disconnect at first the negative (-), and then positive battery room cables Disconnect facing of a rack And around a rack In, address to appropriate section. Disconnect facing of a rack of D/facing over a back door (Versatile person) around a rack In, address to appropriate section. Remove rack facing In above and below, address to appropriate section.

the Section Removal and installation of a forward seat

The arrow A on an accompanying illustration shows in the direction of movement of the car. (2) – a belt tip, (5) – directing a belt.

23Нм

Installation

PERFORMANCE ORDER

Do not press a lock key (10) of a regulator of height of a belt in an installation time.

Installation is carried out in sequence, return to removal. If at a certain execution of a belt the lock uvula in not a working condition of a belt is directed towards a rack In, it is necessary to turn a belt tape at installation on 180 ° (an arrow on an illustration higher). Tighten bolts (4) and (7) moment 55Нм. Check work of a regulator of height of a belt, address to the Section Removal and installation of the top facing of a rack of Century.

During connection of the storage battery in salon there should not be people.

Remove isolating tape from a negative pole of the storage battery, attach at first positive (+), and then a negative cable (-) to a battery battery room.

Observe indications of the Section Replacement of the storage battery.