Audi A4, S4

since 2000 of release

Repair and car operation


Audi A4, S4
+ Introduction
+ Governing bodies and receptions of safe operation
+ Current leaving and service
+ Engine
+ Systems of cooling, heating and air conditioner
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling, power shafts and differential
+ Brake system
+ Suspension bracket and steering
- Body
   General information and security measures at carrying out body works
   Cleaning and leaving
   Repair of insignificant damages of body panels
   Repair of considerable damages of a body
   + External equipment
   - Salon equipment
      Remarks on work with the salon and security measure equipment
      Removal and installation of spring clips
      Removal and installation of the central console
      Removal and installation of the holder of drinks
      Removal and installation of facing of the lever of the parking brake
      Removal and installation of a cover of the lever of switching of transfers/selector
      Removal and ashtray installation
      Removal and installation of the central armrest
      Removal and installation of an internal mirror
      Removal and cover installation on a control panel
      Removal and pocket installation from the driver
      Removal and installation of a ware box
      Removal and installation of an antisolar peak
      Removal and installation of facing are resistant And
      Removal and installation of the top facing of a rack In
      Removal and installation of the bottom facing of a rack In
      Removal and installation of a forward overlay of a threshold
      Removal and installation of facings (Sedan)
      Removal and installation of facings (Versatile person)
      Removal and installation of a forward seat
      Removal and installation of a back seat
      Removal and installation of a forward seat belt
      Removal and installation of a back seat belt
+ Onboard electric equipment

f6be02a9

Removal and installation of a back seat

Back seat

Removal

 PERFORMANCE ORDER

    Strong breakthrough disconnect a seat (arrow A) from holders (1), raise it and pull back (an arrow B on an accompanying illustration).
    Take out the tip of a lateral safety cushion from a groove at a back wall of a pillow of a back seat remove a seat.

Installation

 PERFORMANCE ORDER

    Establish a seat on a place and insert the tip of a lateral safety cushion into a groove in a pillow of a back seat. Shift a seat back, in front press in holders (1) and fix.

Thus do not damage holders.

Back of a back seat, folding

Removal

 PERFORMANCE ORDER

    Cast away forward a back of a back seat.
    Hook and remove behind a cover (3) (an arrow on an accompanying illustration). Turn out the screw (1) and remove a safety collar (2).
    Lift a back (5) of a support (4) and remove from a lateral element of fastening (6). The plug (7), if necessary, again put on.
    Uncover (2) at an armrest (1) in the arrow direction.
    Turn out the screw (3). Take out a finger (4) of a loop (5) and take out an armrest.

Installation

 PERFORMANCE ORDER

    Installation is carried out in sequence, return to removal.

Back of a back seat, motionless

Removal

 PERFORMANCE ORDER

At a detachment of cables of system of a safety cushion surely observe security measures at the address with a safety cushion, address to the Section General information and security measures.

    Remove a back seat. Take out head restraints from backs. Take out directing for head restraints from backs. Thus insert a small screw-driver obliquely through an opening at directing, press a screw-driver inside, release a stopper and take out directing of a back. If necessary, take out from a back a bag frame for skis. Models with a lateral safety cushion: To exclude operation a head safety cushion, switch off ignition and disconnect at first the negative (-), and then positive cables of the storage battery. Instructions are provided in the Section Replacement of the storage battery. Models with a lateral safety cushion: Disunite the safety cushion socket.
    Take out a back (1) upward from collars (2) fastenings (3).

Installation

 PERFORMANCE ORDER

    Installation is carried out in sequence, return to removal.

During connection of the storage battery in salon there should not be people.

    Remove an insulating tape from the negative plug of the storage battery, attach at first positive (+), and then a negative cable (-) to a battery battery room.

Observe indications of the Section Replacement of the storage battery.

Lateral pillow of a back seat

Removal

 PERFORMANCE ORDER

At a detachment of cables of system of a safety cushion surely observe security measures at the address with a safety cushion, address to the Section General information and security measures.

    To exclude operation a head safety cushion, switch off ignition and disconnect at first the negative (-), and then positive battery room cables Remove a back seat.
    Turn out the screw (6).
    Models with a lateral safety cushion: Press a lock level and disunite the safety cushion socket. Unscrew a nut (4), turn out an anchor bolt (5) and remove a lateral pillow (1). (2) - a tarelchaty washer, (3) – a washer.

Installation

 PERFORMANCE ORDER

    Installation is carried out in sequence, return to removal. Thus adjust an anchor bolt and tighten a nut the moment 55Нм. The screw (6) tighten the moment 10Нм.

During connection of the storage battery in salon there should not be people.

    Models with a lateral safety cushion: Remove an insulating tape from the negative plug of the storage battery, attach at first positive (+), and then a negative cable (-) to a battery battery room.

Observe indications of the Section Replacement of the storage battery.

    If after ignition inclusion the safety cushion signaling device on a control panel does not die away, it is necessary to consider information from memory of malfunctions on HUNDRED.