Audi A4, S4

since 2000 of release

Repair and car operation



Audi A4, S4
+ Introduction
+ Governing bodies and receptions of safe operation
+ Current leaving and service
+ Engine
+ Systems of cooling, heating and air conditioner
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling, power shafts and differential
+ Brake system
+ Suspension bracket and steering
- Body
   General information and security measures at carrying out body works
   Cleaning and leaving
   Repair of insignificant damages of body panels
   Repair of considerable damages of a body
   + External equipment
   - Salon equipment
      Remarks on work with the salon and security measure equipment
      Removal and installation of spring clips
      Removal and installation of the central console
      Removal and installation of the holder of drinks
      Removal and installation of facing of the lever of the parking brake
      Removal and installation of a cover of the lever of switching of transfers/selector
      Removal and ashtray installation
      Removal and installation of the central armrest
      Removal and installation of an internal mirror
      Removal and cover installation on a control panel
      Removal and pocket installation from the driver
      Removal and installation of a ware box
      Removal and installation of an antisolar peak
      Removal and installation of facing are resistant And
      Removal and installation of the top facing of a rack In
      Removal and installation of the bottom facing of a rack In
      Removal and installation of a forward overlay of a threshold
      Removal and installation of facings (Sedan)
      Removal and installation of facings (Versatile person)
      Removal and installation of a forward seat
      Removal and installation of a back seat
      Removal and installation of a forward seat belt
      Removal and installation of a back seat belt
+ Onboard electric equipment


f6be02a9

Removal and installation of a forward seat

Removal

 PERFORMANCE ORDER

For removal of a forward seat with a lateral safety cushion the AUDI VAS 6036 adapter is required.

    Seat with height adjustment: Lift a seat.
    Pull upward a cover (2) over a tip (1) belt at a seat and remove.
    Press a belt (1) tip down (arrows) and disconnect from a seat. Extend a seat belt from directing a belt at a seat.
    Shift a forward seat (4) forward.
    Extend 4 clips (2) and remove back safety covers (1). Shift a forward seat back, extend 2 clips and remove forward covers of the directing. Turn out on 2 screws (3) behind and in front. To exclude operation a head safety cushion, switch off ignition and disconnect at first the negative (-), and then positive cables of the storage battery. Instructions are provided in the Section Replacement of the storage battery.
    Cast away back a forward seat (4) and remove upward a cover (5) boxes for tips.

Before undocking of the socket of a lateral safety cushion remove an electrostatic charge for what quickly concern the door or body lock. The adapter of a safety cushion should remain attached until the seat will not be again established. Surely observe security measures at the address with a safety cushion, address to the Section General information and security measures.

    Press a pad at the tip and disunite the socket of a lateral safety cushion (orange color) (6). Disunite the socket of giving of a food (red color) (7), seat heating (8) (green color) and a seat belt (black color) (9) if they are available. Attach the tip lateral a safety cushion (orange color) (6) to the adapter of a safety cushion of VAS 6036.

The adapter provides additional protection against an electrostatic charge.

    If it is possible, other end of the adapter of a safety cushion attach to the tip of giving of a food (red color) (7). Take out a forward seat.

Installation

 PERFORMANCE ORDER

    Installation is carried out in sequence, return to removal. Thus a forward seat fix the moment 50Нм.

During connection of the storage battery in salon there should not be people.

    Remove isolating tape from a negative pole of the storage battery, attach at first positive (+), and then a negative cable (-) to a battery battery room.

Observe indications of the Section Replacement of the storage battery.

    If after ignition inclusion the safety cushion signaling device on a control panel does not die away, it is necessary to consider information from memory of malfunctions on HUNDRED.