Audi A4, S4

since 2000 of release

Repair and car operation



Audi A4, S4
+ Introduction
+ Governing bodies and receptions of safe operation
+ Current leaving and service
+ Engine
+ Systems of cooling, heating and air conditioner
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling, power shafts and differential
+ Brake system
+ Suspension bracket and steering
- Body
   General information and security measures at carrying out body works
   Cleaning and leaving
   Repair of insignificant damages of body panels
   Repair of considerable damages of a body
   + External equipment
   - Salon equipment
      Remarks on work with the salon and security measure equipment
      Removal and installation of spring clips
      Removal and installation of the central console
      Removal and installation of the holder of drinks
      Removal and installation of facing of the lever of the parking brake
      Removal and installation of a cover of the lever of switching of transfers/selector
      Removal and ashtray installation
      Removal and installation of the central armrest
      Removal and installation of an internal mirror
      Removal and cover installation on a control panel
      Removal and pocket installation from the driver
      Removal and installation of a ware box
      Removal and installation of an antisolar peak
      Removal and installation of facing are resistant And
      Removal and installation of the top facing of a rack In
      Removal and installation of the bottom facing of a rack In
      Removal and installation of a forward overlay of a threshold
      Removal and installation of facings (Sedan)
      Removal and installation of facings (Versatile person)
      Removal and installation of a forward seat
      Removal and installation of a back seat
      Removal and installation of a forward seat belt
      Removal and installation of a back seat belt
+ Onboard electric equipment


f6be02a9 На http://www.spbbastion.ru мдф мебельный.

Removal and installation of a ware box

Removal

 PERFORMANCE ORDER

    To exclude operation of a safety cushion of the forward passenger, switch off ignition, then disconnect at first a negative cable (-), and then positive (+) from the storage battery. Stick the negative plug of the battery with a sticky tape. Observe indications of the Section Replacement of the storage battery.
    Disconnect by means of a plastic wedge or a screw-driver a cover (2) sideways at the dashboard (7) and turn out 2 screws (5).
    Open a ware box and turn out at the top of 3 screws (3).
    Turn out 2 screws (4) below.
    Take out down a ware box (1).

Before undocking of cables of system of a safety cushion surely follow the instruction on security measures at the address with a safety cushion, address to the Section General information and security measures.

    Disunite the socket (6) of a lamp of illumination of a ware box, and also shutdown of a safety cushion of the forward passenger. For this purpose press a blocking level and disunite the socket.

Installation

 PERFORMANCE ORDER

    Installation is carried out in sequence, return to removal.

At shutdown of the storage battery in the car there should not be people.

    Remove an insulating tape from the negative plug of the storage battery, attach at first a positive cable (+), and then a negative cable (-) to a battery battery room.

Observe indications of the Section Replacement of the storage battery.