Audi A4, S4

since 2000 of release

Repair and car operation



Audi A4, S4
+ Introduction
+ Governing bodies and receptions of safe operation
+ Current leaving and service
+ Engine
+ Systems of cooling, heating and air conditioner
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling, power shafts and differential
+ Brake system
+ Suspension bracket and steering
- Body
   General information and security measures at carrying out body works
   Cleaning and leaving
   Repair of insignificant damages of body panels
   Repair of considerable damages of a body
   + External equipment
   - Salon equipment
      Remarks on work with the salon and security measure equipment
      Removal and installation of spring clips
      Removal and installation of the central console
      Removal and installation of the holder of drinks
      Removal and installation of facing of the lever of the parking brake
      Removal and installation of a cover of the lever of switching of transfers/selector
      Removal and ashtray installation
      Removal and installation of the central armrest
      Removal and installation of an internal mirror
      Removal and cover installation on a control panel
      Removal and pocket installation from the driver
      Removal and installation of a ware box
      Removal and installation of an antisolar peak
      Removal and installation of facing are resistant And
      Removal and installation of the top facing of a rack In
      Removal and installation of the bottom facing of a rack In
      Removal and installation of a forward overlay of a threshold
      Removal and installation of facings (Sedan)
      Removal and installation of facings (Versatile person)
      Removal and installation of a forward seat
      Removal and installation of a back seat
      Removal and installation of a forward seat belt
      Removal and installation of a back seat belt
+ Onboard electric equipment


f6be02a9

Removal and installation of the central console

1 — the Central console
2 — the Overlay of switching
3 — the Cover
4 — Screws
5 — the Cover under the lever of the parking brake
6 — the Connecting element

7 — Screws
8 — Screws
9 — Screws
10 — Screws
11 — the Nut, 26Нм
12 — Nuts, 26Нм

Removal

 PERFORMANCE ORDER

    Disconnect a negative cable (-) the storage battery.

Observe indications of the Section Replacement of the storage battery.

    Tighten the parking brake. Remove facing of the lever of the parking brake, address to the Section Removal and installation of facing of the lever of the parking brake. AT: Move the selector back. Uncover the lever of switching and remove the lever. Remove a lobby and a back ashtray, address to the Section Removal and ashtray installation. Remove the central armrest if it is established, address to the Section Removal and installation of the central armrest. Remove a radio receiver, address to the Section Removal and radio receiver installation / the navigation device/CD-чейнджера. Remove the control panel the heater/conditioner, address to the Section Removal and control unit installation by the heater/conditioner. Disconnect from the central console an overlay of switching (2), address to the Section Removal and installation of the holder of drinks. Take out from the central console the right and left covers (3) and turn out fastening screws around an arrangement of feet. Take out by means of a plastic wedge a cover (5) of the central console under the lever of the parking brake. Depending on model disunite the lighter or control unit socket navigation. Turn out 2 screws of fastening (7) at a connecting element (6) and take out a connecting element. Turn out 2 screws (8) under an ashtray. Turn out 4 screws (9), and also 2 screws (10) of fastening of the central console (1). The car with the central armrest: Unscrew a nut (11). Unscrew 2 nuts (12). Pull the central console (1) back and remove from a floor.

The central console separates hardly.

Installation

 PERFORMANCE ORDER

    Installation is carried out in sequence, return to removal. Thus nuts (11) and (12) are tightened by the moment 26Нм. Attach a negative cable (-) the storage battery.

Observe indications of the Section Replacement of the storage battery.