Audi A4, S4

since 2000 of release

Repair and car operation



Audi A4, S4
+ Introduction
+ Governing bodies and receptions of safe operation
+ Current leaving and service
+ Engine
+ Systems of cooling, heating and air conditioner
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling, power shafts and differential
+ Brake system
+ Suspension bracket and steering
- Body
   General information and security measures at carrying out body works
   Cleaning and leaving
   Repair of insignificant damages of body panels
   Repair of considerable damages of a body
   - External equipment
      Installation of the forward panel in situation for maintenance
      Removal and installation of a cover of a water modular compartment
      Removal and installation of a front bumper
      Removal and installation of a loker of a back wing
      Removal and installation of a loker of a forward wing
      Removal and installation of a forward wing
      Removal and installation of a rear bumper
      Removal and cowl installation/adjustment
      Removal and installation of a cable of a drive of a cowl
      Removal and installation of a clamp of the lock
      Removal and installation of facing of a forward door
      Removal and installation of facing of a back door
      Removal and door installation
      Door adjustment
      Removal and installation of a frame of a window of a forward door
      Removal and window regulator installation
      Removal and installation of the electric motor of a drive of a window regulator
      Removal and installation of the lock of a door
      Removal and installation of the handle of a door
      Removal and installation of the cylinder of the lock of a door
      Removal and installation of facing of a trunk lid
      Removal, installation and trunk lid adjustment
      Removal and installation of the lock of a luggage carrier
      Removal and installation of facing of a door of a back (Versatile person)
      Removal and installation of a door of a back (Versatile person)
      Removal and installation of the lock of a door of a back (Versatile person)
      Removal and installation of an external mirror
      Removal and installation of moldings
      Removal, installation and check of the movable panel of a roof
      Removal and installation of an overlay of the movable panel of a roof
      Check and adjustment of a starting position of the movable panel of a roof
      Removal and installation of a sealant of the movable panel
      Replacement of elastic bands of brushes of a screen wiper
      Removal and installation of a jet of a stekloomyvatel of a windscreen
      Removal and installation of a jet of a washer of back glass
      Removal and installation of the lever of a cleaner of a windscreen
      Removal and installation of the lever of a cleaner of back glass
      Removal and installation of jets of a faroomyvatel
      Adjustment of levers of a screen wiper
   + salon Equipment
+ Onboard electric equipment


f6be02a9

Removal and installation of the lock of a luggage carrier

1 — the luggage carrier Lock
2 — the Hinge
3 — Nuts, 8Нм
4 — Draught
5 — the Cable
6 — the lock Cylinder

7 — the Bolt, 8Нм
8 — the Electric motor of the uniform lock
9 — Planck
10 — the Nut, 8Нм, 4 pieces.
11 — the Bolt, 2 pieces.

Sedan

Lock cylinder

Removal

 PERFORMANCE ORDER

    Disconnect a negative cable (-) the storage battery.

Observe indications of the Section Replacement of the storage battery.

    Open a luggage carrier and uncover the lock. Disunite the socket of the cylinder of the lock. Disconnect from the cylinder a drive (5). Turn the cylinder on 90 ° and take out from a level (9).

Installation

 PERFORMANCE ORDER

    Installation is carried out in sequence, return to removal. Thus a bolt (7) tighten the moment 8Нм. Attach a negative cable (-) the storage battery.

Observe indications of the Section Replacement of the storage battery.

Electric motor of the uniform lock

Removal

 PERFORMANCE ORDER

    Disconnect a negative cable (-) the storage battery.

Observe indications of the Section Replacement of the storage battery.

    Open a luggage carrier and uncover the lock. Disconnect a driving bar (4) at the electric motor (arrow A). Turn out 2 screws (11) and remove the electric motor (8) from a trunk lid. Disunite the electric motor socket.

Installation

 PERFORMANCE ORDER

    Installation is carried out in sequence, return to removal. Attach a negative cable (-) the storage battery.

Observe indications of the Section Replacement of the storage battery.

Level

Removal

 PERFORMANCE ORDER

    Open a luggage carrier and uncover the lock. Remove the lock cylinder, address to the Section Removal and installation of the cylinder of the lock of a door. Unscrew 4 nuts (10), press levels (arrows B) and take out a level upward.

Installation

 PERFORMANCE ORDER

    Installation is carried out in sequence, return to removal. Thus tighten nuts the moment 8Нм.