Weaken screws of fastening of a clamp of the lock.
|
Door adjustment in the longitudinal direction: Weaken screws of fastening of loops (arrow A) to a rack And (3) (a back door: the rack (In) so that a door (2) with loops (1) could move in grooves.
|
|
|
|
To some screws of fastening access is available only from within. For this purpose it is necessary to remove at first the bottom upholstery on a rack And or V.Na is shown to an accompanying illustration the bottom loop at the closed door. |
|
Door adjustment in the longitudinal direction: Expose a door according to the set gaps and tighten screws of fastening of loops the moment 32Нм.
Door adjustment in the cross-section direction, 1 reception: Weaken screws of fastening of loops (arrow B) so that it was possible to displace a door (2) with loops in grooves. Expose a door so that its contour was aflush with adjacent elements of a body. It belongs first of all to a forward part of a door. In a back part the door is regulated at the expense of a lock clamp. Screws of fastening of loops tighten the moment 32Нм.
|
Door adjustment in the cross-section direction, the 2nd reception: In a back part of a door adjustment is carried out at the expense of a lock (1) clamp.
|
|
|
|
Labels (shooters and / c) are applied to lateral adjustment, a label (arrow b/d) for adjustment on height. |
|
Weaken screws (2) and displace a lock clamp. Adjust a clamp so that the door stood a little outside. Carefully close a door so that was aflush with adjacent elements of a body, and the lock clamp correctly came into the lock.
Tighten screws of fastening of a clamp of the lock the moment 25Нм.
|
