Audi A4, S4

since 2000 of release

Repair and car operation



Audi A4, S4
+ Introduction
+ Governing bodies and receptions of safe operation
+ Current leaving and service
+ Engine
+ Systems of cooling, heating and air conditioner
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling, power shafts and differential
+ Brake system
+ Suspension bracket and steering
- Body
   General information and security measures at carrying out body works
   Cleaning and leaving
   Repair of insignificant damages of body panels
   Repair of considerable damages of a body
   - External equipment
      Installation of the forward panel in situation for maintenance
      Removal and installation of a cover of a water modular compartment
      Removal and installation of a front bumper
      Removal and installation of a loker of a back wing
      Removal and installation of a loker of a forward wing
      Removal and installation of a forward wing
      Removal and installation of a rear bumper
      Removal and cowl installation/adjustment
      Removal and installation of a cable of a drive of a cowl
      Removal and installation of a clamp of the lock
      Removal and installation of facing of a forward door
      Removal and installation of facing of a back door
      Removal and door installation
      Door adjustment
      Removal and installation of a frame of a window of a forward door
      Removal and window regulator installation
      Removal and installation of the electric motor of a drive of a window regulator
      Removal and installation of the lock of a door
      Removal and installation of the handle of a door
      Removal and installation of the cylinder of the lock of a door
      Removal and installation of facing of a trunk lid
      Removal, installation and trunk lid adjustment
      Removal and installation of the lock of a luggage carrier
      Removal and installation of facing of a door of a back (Versatile person)
      Removal and installation of a door of a back (Versatile person)
      Removal and installation of the lock of a door of a back (Versatile person)
      Removal and installation of an external mirror
      Removal and installation of moldings
      Removal, installation and check of the movable panel of a roof
      Removal and installation of an overlay of the movable panel of a roof
      Check and adjustment of a starting position of the movable panel of a roof
      Removal and installation of a sealant of the movable panel
      Replacement of elastic bands of brushes of a screen wiper
      Removal and installation of a jet of a stekloomyvatel of a windscreen
      Removal and installation of a jet of a washer of back glass
      Removal and installation of the lever of a cleaner of a windscreen
      Removal and installation of the lever of a cleaner of back glass
      Removal and installation of jets of a faroomyvatel
      Adjustment of levers of a screen wiper
   + salon Equipment
+ Onboard electric equipment


f6be02a9

Removal and installation of a frame of a window of a forward door

Frame of a window of a forward door

Instruction: Removal and installation of a frame of a back door essentially does not differ.
1 — a window Frame
2 — the Window regulator
3 — the Forward door
4 — the Bolt, 32Нм
5 — the Cover

6 — the Bolt, 32Нм
7 — the Bolt, 6Нм
8 — the Bolt, 32Нм
9 — the Bolt, 32Нм
10 — the Bolt, 10Нм

Removal

 PERFORMANCE ORDER

    Disconnect a negative cable (-) the storage battery.

Observe indications of the Section Replacement of the storage battery.

    Remove a door upholstery, address to appropriate section. Disunite all sockets. Remove the window regulator electric motor, address to the Section Removal and installation of the electric motor of a drive of a window regulator. Turn out consistently bolts (7), (4), (8), (10), (6) and (9), previously having uncovered (5). Take out up a window (1) frame with a window regulator (2) of a door (3). An arrow – the fixing screw.

Installation

 PERFORMANCE ORDER

    Enter glass on a half into a window frame. Insert a window frame with a window regulator from above into a door. Press carving fingers of the electric motor of a window regulator via the internal panel of a door so that they were fixed. Lay above a door sealant at a window frame. Screw consistently bolts (6), (9), (4), (8), (10) and (7). Tighten by hand bolts (6) and (9). Press from above a window frame inside and tighten bolts (4) and (8) the moment 32Нм. Press on a cover (5). Tighten bolts (6) and (9) moment 32Нм. Tighten a bolt (10) moment 10Нм. Tighten bolts (7) moment 6Нм. Tighten fixing screw (shooter) the moment 32Нм. Establish into place the electric motor of a drive of a window regulator, address to the Section Removal and installation of the electric motor of a drive of a window regulator. Join the socket. Establish a door upholstery, address to the Section Removal and installation of facing of a forward door. Attach a negative cable (-) the storage battery.

Observe indications of the Section Replacement of the storage battery.