Audi A4, S4

since 2000 of release

Repair and car operation



Audi A4, S4
+ Introduction
+ Governing bodies and receptions of safe operation
+ Current leaving and service
+ Engine
+ Systems of cooling, heating and air conditioner
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling, power shafts and differential
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Specifications
   Diagnostics of malfunctions of onboard electric equipment - the general information
   Rassoyedineniye of sockets
   Check of the electric motor of a screen wiper
   Check of warmed back glass
   Check of stoplights
   Removal and installation of a sound signal
   Removal and installation of sensors of a parking
   Replacement of the battery of a remote control of the ignition key
   Relay and safety locks
   Replacement of filament lamps of devices of external lighting
   Removal and installation of headlights
   Removal and installation of the lateral repeater of turns
   Removal and installation of an additional stoplight
   Removal and installation of a back lamp
   Removal and installation of a lamp of illumination of registration plate
   Removal and installation of plafonds of internal lighting
   Removal and installation of a control panel
   Removal and installation of the podrulevy switch
   Removal and installation of switches of a forward door
   Removal and installation of the switch of light
   Removal and installation of the switch of a window regulator in a back door
   Removal and installation of the switch of a trunk lid
   Removal and installation of the switch of the parking brake
   Removal and installation of the switch of illumination of a ware box
   Removal and installation of switches of the central console
   Removal and radio receiver installation / navigation device/CD-чейнджера
   Removal and installation of loudspeakers
   Removal and installation of aerials
   Removal and installation of the tank of liquid стеклоомывателя / pump electric motor
   Removal and installation of the electric motor of a cleaner of a windscreen
   Removal and electric motor installation on back glass (Versatile person)
   The uniform lock - the general information
   Removal and installation of a locking element of a cover of a fuel tank
   Digital tire of data of CAN
   + Schematic diagrams of electric equipment


f6be02a9 webcam

Removal and installation of plafonds of internal lighting

The exhaust hook is necessary for removal of a plafond of internal lighting, for example, 3370 or HAZET 2520-1. It is possible to apply also plastic wedge to this purpose, for example, HAZET 1965-20 (address to an illustration below).

 PERFORMANCE ORDER

    Switch off the switch of the corresponding plafond. Switch off ignition.

Forward ceiling plafond/plafond of illumination for reading

 PERFORMANCE ORDER

    Extend by means of a hook a cover of a plafond and remove it.
    Turn out screws (arrows on an accompanying illustration).
    Lower a forward plafond down and take out from an adjusting aperture in a ceiling. Disunite the plafond socket. Installation is carried out in sequence, return to removal.

Replacement of the filament lamp of a plafond of illumination for reading

 PERFORMANCE ORDER

    Press a lamp (1) and (2) into a cartridge, turn and take out. Replace a lamp with the new.

Replacement of the filament lamp of a ceiling plafond

 PERFORMANCE ORDER

    Take out by means of a hook a rasseivatel of a ceiling plafond and remove it.
    Take out a sofitny lamp (1) and (2) of the boss and replace with the new.

Back plafond of illumination for reading

 PERFORMANCE ORDER

    Take out by means of a hook a plafond from an adjusting aperture in a ceiling. Disunite the lamp socket. Installation is carried out in sequence, return to removal.

Filament lamp replacement

 PERFORMANCE ORDER

    Press a lamp from a reverse side of a plafond, turn and take out it. Replace a lamp with the new.

Lamp of illumination of a ware box

Some lamps, for example, a lamp of a door signaling device, a lamp of illumination of an entrance, a forward lamp of illumination of the region of feet and a lamp of illumination of a luggage carrier (sedan) are taken out similar to a lamp of illumination of a ware box.

 PERFORMANCE ORDER

    Lamp of illumination of a ware box: Open a ware box.
    Take out a lamp (2) by means of a plastic wedge, for example, HAZET 1965-20 of an adjusting aperture. Thus put a wedge in a groove. (1) – lock level.
    Disunite the socket (3) lamps. Installation is carried out in sequence, return to removal. Thus insert a lamp from the tip into an opening and fix on the other hand.

Filament lamp replacement

 PERFORMANCE ORDER

    If necessary, cast away up a cover from a reverse side of a lamp (the shooter on an accompanying illustration).
    Take out a lamp from the boss and replace with the new.

Plafond of illumination of a cargo compartment (Versatile person)

 PERFORMANCE ORDER

    Take out a plafond by means of a hook from an adjusting aperture in a ceiling.
    Disunite the lamp socket.
    Installation is carried out in sequence, return to removal.

Filament lamp replacement

 PERFORMANCE ORDER

    Put a screw-driver at a groove, hook and remove a rasseivatel.
    Take out a sofitny lamp from the boss and replace with the new.

Plafond of a door of a back (Versatile person)

 PERFORMANCE ORDER

    Take out by means of a hook a plafond from an adjusting opening in the direction of movement of the car (the shooter on an accompanying illustration).
    Disunite the lamp socket.
    Installation is carried out in sequence, return to removal. Thus insert a plafond into an opening and an aperture and fix it clips.

Filament lamp replacement

 PERFORMANCE ORDER

    Take out a reflector (1) from a reverse side of a plafond (2) and then a sofitny lamp. Replace a lamp with the new.

Back plafond of illumination of the region of feet

 PERFORMANCE ORDER

    Shift a plafond towards outer side of the car (the shooter on an accompanying illustration) and take out it from an adjusting aperture.
    Disunite the lamp socket. Installation is carried out in sequence, return to removal. Thus a lamp insert into an aperture the shtekerny party.

Filament lamp replacement

 PERFORMANCE ORDER

    Release lock levels (arrows on an accompanying illustration), hook from a reverse side and uncover.
    Take out a lamp from the boss and replace it new.

Plafond of illumination of a cosmetic mirror

 PERFORMANCE ORDER

    Put a screw-driver in a groove, hook and take out a plafond from an adjusting opening in a ceiling. Disunite the lamp socket. Installation is carried out in sequence, return to removal. Thus insert a lamp into an aperture behind the shtekerny party and fix from a reverse side.

Filament lamp replacement

 PERFORMANCE ORDER

    Cast away a cover from a reverse side of a plafond (the shooter on an accompanying illustration) and take out a sofitny lamp from the boss. Replace a lamp with the new.

Illumination of the handle of a door

 PERFORMANCE ORDER

    Disconnect a negative cable (-) the storage battery.

Observe indications of the Section Replacement of the storage battery.

    Remove a door upholstery, address to the Section Removal and installation of facing of a forward door.
    Take out a lamp (1) of the holder on a door upholstery.
    Disunite the socket (2) lamps. Installation is carried out in sequence, return to removal. Thus insert a lamp into an adjusting aperture and fix.