Audi A4, S4

since 2000 of release

Repair and car operation



Audi A4, S4
+ Introduction
- Governing bodies and receptions of safe operation
   Governing bodies and devices
   Information system of the driver (FIS)
   Unlocking and car locking
   Lighting and providing review
   Seats and niches
   Heater, ventilation and air conditioner
   Automatic transmission (AT)
   Communication and navigation
   Universal remote radio management of HOME LINK®
   Safety systems
   Features of operation and auxiliary systems
   Running in
   Trailer towage
   In case of emergency
   Car filling
+ Current leaving and service
+ Engine
+ Systems of cooling, heating and air conditioner
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling, power shafts and differential
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


f6be02a9

Seats and niches

Manual adjustment of forward seats

Regulators of provision of a seat

The seat can be regulated on many parameters.

Regulators of a seat of the driver

1 — Longitudinal adjustment of provision of a seat
2 — Adjustment of height of a seat
3 — Adjustment of an exit lumbar опоры*
4 — Adjustment of an inclination of a back

Some of the shown governing bodies enter into a complete set of only certain updatings or are established to order.

Longitudinal adjustment of a seat

 PERFORMANCE ORDER

    Pull the handle (1) up, and thus displace a seat in the necessary situation. Release the handle (2) and move a seat to a clamp zashchelkivaniye.

Regulation of height of a seat


Podnimaniye of a seat

 PERFORMANCE ORDER

    Pull the handle (2) up.


Seat lowering

 PERFORMANCE ORDER

    Wring out the handle (2) down.

Regulation of an inclination of a back

 PERFORMANCE ORDER

    Unload a seat back (do not lean on a back). Regulate a back inclination rotation of a flywheel (4).

Regulators of provision of a seat (sports seat)

The seat can be regulated on many parameters.

Regulators of a seat of the forward passenger

1 — Longitudinal adjustment of provision of a seat
2 — Lengthening of a pillow of a seat
3 — Adjustment of an inclination of a seat
4 — Adjustment of height of a seat
5 — Adjustment of an exit lumbar опоры*
6 — Adjustment of an inclination of a back

Some of the shown governing bodies enter into a complete set of only certain updatings or are established to order.

Longitudinal adjustment of a seat

 PERFORMANCE ORDER

    Pull the handle (1) up, and thus displace a seat in the necessary situation. Release the handle (1) and move a seat to a clamp zashchelkivaniye.

Seat pillow


Vydviganiye of a pillow

 PERFORMANCE ORDER

    Raise a key (2). Displace a seat forward and establish a pillow in the necessary situation.


Zadviganiye of a pillow

 PERFORMANCE ORDER

    Raise a key (2). Displace a seat back and establish a pillow in the necessary situation.

Adjustment of an inclination of a seat

 PERFORMANCE ORDER

    Pull the handle (3) up and change the provision of a seat, unloading and loading it with a body weight.

Regulation of height of a seat


Podnimaniye of a seat

 PERFORMANCE ORDER

    Delay the handle (4) up (swing).


Seat lowering

 PERFORMANCE ORDER

    Wring out the handle (4) down (swing).

Regulation of an inclination of a back

 PERFORMANCE ORDER

    Unload a seat back (do not lean on a back). Regulate a back inclination rotation of a flywheel (6).

Electric adjustment of forward seats

Regulation of provision of a seat

The principle of management of regulators corresponds to a design and seat function.

Forward seat: situation regulators

And — Regulation of provision of a seat
In — Adjustment of an inclination of a back
With — Adjustment of an exit lumbar опоры*

Forward seat: regulator

Governing bodies of regulation of provision of seats on the arrangement, design and a functional purpose correspond to a seat design. Regulation of provision of a seat is carried out according to this logic by pressing of switches.

Seat giving forward/back

 PERFORMANCE ORDER

    Press the switch (A) forward or back (1).

Seat lifting/lowering

 PERFORMANCE ORDER

    Delay/press the switch (And) up or down.

Lifting/lowering of a forward part of a pillow

 PERFORMANCE ORDER

    Press the switch (And) up or down (2).

Lifting/lowering of a back part of a pillow

 PERFORMANCE ORDER

    Press the switch (A) up or down (3).

Regulation of an inclination of a back

Forward seat: regulator of an inclination of a back

 PERFORMANCE ORDER

    For lifting or lowering of a back press the switch forward or back in the directions specified by shooters.

Exit of a lumbar support

 PERFORMANCE ORDER

    The exit of a lumbar support provides a support of lumbar department of a backbone on all natural contour.


Camber adjustment

 PERFORMANCE ORDER

    For a vydviganiye of an upholstery press the forward party of the krupnoformatny button (C). For an ubiraniye of an upholstery press the back party of the button (C).


Height adjustment

 PERFORMANCE ORDER

    For upholstery shift up press the top party of the button (C). For upholstery shift down press the bottom party of the button (C).

The lumbar support provides a prileganiye of lumbar department of a backbone on all its natural contour, with the landing which is not tiring even at long trips.

Memory of provision of a seat of the driver

Description

Located at doors of the driver keys of a memory it is possible to program and reproduce four various versions of the provision of a seat and external зеркал*.

Door of the driver: memory

Memory keys

Keys of a memory 1, 2, 3 and 4 it is possible to program and reproduce at most four various versions of the provision of a seat and external зеркал*.

STOP key

The memory of provision of a seat is disconnected by STOP key pressing. The inscription which was near the STOP key of OFF (it is visible only at included light) thus burns.

All entered provisions remain in memory. The provision of a seat and external зеркал* thus can be regulated in only the usual way - by means of the electric drive. The memory is recommended to be disconnected in STOP key pressing at incidental using the car the driver and consequently lack of need of programming of provision of a seat for it.

The programmed provisions can be reproduced also by means of remote radio management, see below.

Programming of provisions

During the programming and reproduction of all functions it should be pressed the STOP key (is drowned).

 PERFORMANCE ORDER

    Adjust the provision of a seat of the driver, see above. Adjust the provision of both external mirrors, see. Lighting and providing review. Press and hold a MEMO key. In addition press and hold not less than 1 second one of memory keys. Release keys. This situation is entered now into memory and corresponds to number of the key chosen at input.

At each new programming on the same key there is a dumping of the previous data. When programming it is recommended to begin with a key 1, leaving for other drivers on one of other keys.

When locking car by a radio key (remote radio management) the last provision of a seat and mirrors is entered into memory. This provision of a seat and mirrors automatically is reproduced remote radio management at the subsequent unlocking of the car. The provision of external mirrors is reproduced right after unlocking, and the provision of a seat of the driver after opening of a door of the driver.

Thus however there is no dumping of data of a memory undertaken before distribution on keys 1-4. At any time reproduction of the entered provisions by the corresponding keys is possible.

Reproduction of provisions

The programmed provisions can be reproduced both memory keys, and remote radio management (radio key).

Reproduction by memory keys

 PERFORMANCE ORDER

    At an open door of the driver once press the corresponding key of a memory. At the closed door of the driver press and hold the corresponding key of a memory while the seat and external mirrors will not occupy the programmed situation.

Reproduction by remote radio management

 PERFORMANCE ORDER

    Unlock the car remote radio management and within the next 10 minutes open a door of the driver.

If after car unlocking by remote radio management the door of the driver remains closed during 10 minutes, the provision of a seat reproduce memory keys.

Radio key programming

For reproduction of the entered provisions by remote radio management it is necessary to program a radio key on a memory key.

Radio key programming on a memory key

 PERFORMANCE ORDER

    The corresponding key of a memory to which should correspond furnished the clue, reproduce the programmed provisions. Press and hold this key and within 10 seconds in addition press the button of unlocking of a radio key. About 2 seconds of later, release a key.

Cancellation of programming of a radio key on a memory key

 PERFORMANCE ORDER

    Press and hold a MEMO key and within 10 seconds in addition press the button of unlocking of a radio key. About 2 seconds of later, release a MEMO key.

When reprogramming there is an automatic dumping of the previous data.

It is recommended to program, that the key 1 corresponded to one, and a key 2 - to other factory radio key. Through the contractual partner of Audi if necessary it is possible to get two more other radio keys and to program on keys 3 and 4.

Head restraints

Head restraints of forward seats

Correctly established head restraints in a combination to the fastened seat belt provide effective protection.

Forward seat: head restraint

Head restraint lifting

 PERFORMANCE ORDER

    Undertake for боковины a head restraint both hands. So adjust the provision of a head restraint that the upper edge of a head restraint was a minimum at level or above level of eyes.

Head restraint lowering

 PERFORMANCE ORDER

    Undertake for боковины a head restraint both hands. Press the button (A) and so adjust the provision of a head restraint that the upper edge of a head restraint was a minimum at level or above level of eyes.

Inclination regulation

 PERFORMANCE ORDER

    Undertake for боковины a head restraint both hands and wring out it forward or back.

Removal of head restraints

 PERFORMANCE ORDER

    Pull a head restraint against the stop up. Press the button (B) and take a head restraint.

Installation of head restraints

 PERFORMANCE ORDER

    Insert and move head restraint bars in directing till their fixing.

Head restraints are regulated on height and an inclination. They should be established on growth. Correctly established head restraints in a combination to seat belts provide effective protection.

The optimum protective effect is provided when finding the upper edge of a head restraint at least at level or above level of eyes.

Head restraints of back lateral seats

Head restraint of a back lateral seat

Head restraint lifting

 PERFORMANCE ORDER

    Undertake for боковины a head restraint both hands. So adjust the provision of a head restraint that the upper edge of a head restraint was a minimum at level or above level of eyes.

Head restraint lowering

 PERFORMANCE ORDER

    Undertake for боковины a head restraint both hands. Press the button (A) and so adjust the provision of a head restraint that the upper edge of a head restraint was a minimum at level or above level of eyes.

Removal of head restraints

 PERFORMANCE ORDER

    Pull a head restraint against the stop up. Press the button (B), and at the same time take a head restraint.

Installation of head restraints

 PERFORMANCE ORDER

    Insert and move head restraint bars in directing before click.

Average head restraint of a back seat

Head restraint lifting

 PERFORMANCE ORDER

    Undertake for боковины a head restraint both hands. So adjust the provision of a head restraint that the upper edge of a head restraint was a minimum at level or above level of eyes.

Head restraint lowering

 PERFORMANCE ORDER

    Undertake for боковины a head restraint both hands. Press the button (In) and so adjust the provision of a head restraint that the upper edge of a head restraint was a minimum at level or above level of eyes.

Removal of head restraints

 PERFORMANCE ORDER

    Pull a head restraint against the stop up. Press the button (In) and at the same time take a head restraint.

Installation of head restraints

 PERFORMANCE ORDER

    Insert and move head restraint bars in directing before click.

Armrest

In многоступенчато an adjustable armrest there is a ware compartment.

Forward dividing armrest

Regulation of provision of an armrest

 PERFORMANCE ORDER

    For regulation of an inclination take away an armrest completely down. Lift an armrest, passing the fixed provisions up to the necessary.

Opening of a ware compartment

 PERFORMANCE ORDER

    Press unlocking button.

Remember that at the armrest lowered against the stop mobility of a forearm is limited. Therefore at movement on the city do not lower an armrest.

Luggage carrier

Luggage carrier loading

Subjects of luggage should be correctly and are reliably placed.

Heavy subjects place as it is possible further ahead

In interests of preservation of good dynamics of the car remember the following:

    Distribute cargo as far as it probably evenly. Heavy subjects place as it is possible further ahead. By means of cargo holding сетки* or inelastic tension tapes fix luggage subjects for lifting eyes.

Pressure of air in tires should correspond to car loading; see a sticker of pressure of air in tires on a door rack, see. Specifications.

Lifting eyes

For fastening of subjects of luggage in a luggage carrier there are four lifting eyes.

Arrangement of lifting eyes of a luggage carrier

 PERFORMANCE ORDER

    By means of lifting eyes fix cargo. Accept security measures, see. Safety systems.

The grid interferes with shift of easy cargo.

 PERFORMANCE ORDER

    Pass in the beginning forward hooks in lifting eyes. Then pass back hooks in lifting eyes.

Cargo holding grid / укладочная a grid

The grid interferes with shift of easy cargo in a luggage carrier and can be used also as an ukladochny grid.

The cargo holding grid suspended for hooks

Cargo holding grid

 PERFORMANCE ORDER

    Fix a grid for four lifting eyes.

Ukladochny grid

 PERFORMANCE ORDER

    Pass hooks of an ukladochny grid in the lifting eyes located in the bottom of a back of a luggage carrier. By means of a plate take away down located in the top part of a luggage carrier fixing hooks (A), pull a grid up and fix loops of a cargo holding grid for hooks.

Hooks can be used also for suspension of bags, packages etc.

If hooks are not used, they come back independently to a starting position.

Protective covering bath

At transportation of the polluted subjects it is necessary to use a protective covering bath.

Raskladyvaniye of a protective covering bath

The straightened sheeting in a luggage carrier

 PERFORMANCE ORDER

    Open a trunk lid. Pull a key (A). Straighten the combined covering (C).

Opening of a cover of the through hatch

 PERFORMANCE ORDER

    Open a trunk lid. Pull a key (B).

Sheeting of a put back of a back seat

Sheeting of the combined back of a back seat

 PERFORMANCE ORDER

    Combine a back of a back seat forward, see below. Lay a covering (D) on the combined back of a back seat.

The protective covering bath of a luggage carrier represents a put synthetic covering to which if necessary can cover all luggage carrier, including racks of shock-absorbers. The sheeting of a back of a back seat can use also separately, without use of a protective covering bath of a luggage carrier. The covering of a back consists of two parts and it can develop in the ratio 1/3 and 2/3.

Put a protective covering bath only the dry.

Lateral niche

In the left lateral niche of a luggage carrier there is a CD player (CDROM) for system навигации*.

Luggage carrier: the CD player of system of navigation under a cover of a lateral covering

For opening pull the handle forward.

The CD player (CDROM) for system of navigation is in a luggage carrier niche. The description of using is provided by a player in the corresponding operation manual.

Increase in the sizes of a luggage carrier

For increase dimensional a luggage carrier it is possible to put forward both components of a back together or separately.

Back folding

The unlocking handle of a back

 PERFORMANCE ORDER

    Wring out in the arrow direction unlocking handle (A). Combine a back forward.

Return of a back to a starting position

 PERFORMANCE ORDER

    Take away a back back till its reliable fixing. At the correct fixing of a back the red label of a pin should not be visible (in).

Back locking

 PERFORMANCE ORDER

    Turn to the right inserted into the lock of the unlocking handle.

Back unlocking

Back locking

 PERFORMANCE ORDER

    Turn to the left inserted into the lock of the unlocking handle a key.

Correctly fixed back of a back seat (normal situation) can be locked and unlocked only the basic or an emergency key (the lock is in the unlocking handle). Thanks to it undesirable penetration into a luggage carrier from car salon is prevented.

At return of a back to a starting position watch, that seat belts of lateral seats were in a lentonapravlyayushchy trench. Otherwise belts can get to the back lock that can lead to their damage.

Ware shelf

The ware shelf behind a back of a back seat can be used for easy subjects of clothes.

Remember that subjects rubbing about back glass can damage system of its electroheating.

For ensuring normal air exchange do not cover with things the exhaust cracks being on a joint of back glass and the ware shelf.

The through loading hatch with a cover

Using the through loading hatch with a cover adjoining it, it is possible to transport lengthy subjects in salon (for example, skis), without being afraid for their safety, purity and serviceability.

Loading

Fragment of the back party of a back seat: cover of the loading hatch

 PERFORMANCE ORDER

    Open a luggage carrier. In a luggage carrier press the button of unlocking of a cover of the loading hatch (the shooter illustrations) and take away a cover down. Take away forward a back dividing armrest. In salon wring out down the button of unlocking of a cover of the loading hatch and release a cover. Take and straighten a cover. Insert skis or other similar subjects through a luggage compartment into a cover being in salon.

Fastening

Cover fastening by a belt in the lock of the central back seat

 PERFORMANCE ORDER

    Insert a belt of a cover (A) into the lock of a seat belt of the central seat (B). Hardly pull a belt for its free end (C).

Cover filling into place

 PERFORMANCE ORDER

    Close in a luggage carrier a cover of the loading hatch. Accurately combine a cover and fill it into place. Close in salon a cover.

Do not put a wet cover after using of.

Luggage carrier on a roof

Gutters of the car are executed in a roof taking into account branch of storm drains. Therefore do not use the usual luggage carriers intended for installation on a roof of the car.

In case of use of other systems of fastening of a luggage carrier on a roof or at its installation not on the instructions which have arisen in this regard of damage to guarantee repair are not subject.

Fastening points

Luggage carrier on a roof fix only in the marked places.

Points of fastening of basic arms of a luggage carrier

Installation

At installation of basic arms watch, that they precisely entered between shooters of a marking in a condensing ledge of a roof. Labels are visible only in public.

Load of a roof

Cargo on a roof should be reliably fixed. In transit cargo dynamic properties of the car change.

The permissible load on a roof of your car makes 75 kg. Load of a roof is defined by the sum of weight of system of fastening and cargo.

When using systems of fastening with smaller loading capacity it is impossible to use completely a permissible load on a roof. To load a luggage carrier it is possible only to specified in the instruction on its installation of a limit.

Luggage carrier on a roof remove right after using. On high speed fuel consumption because of increase in aerodynamic resistance increases.

Coasters

Forward coaster

Coaster

 PERFORMANCE ORDER

    For opening press a coaster cover with a symbol. For coaster installation in a starting position push it completely back till fixing.

Coasters in a forward dividing armrest

Forward dividing armrest

Coasters in an armrest

Armrest opening

 PERFORMANCE ORDER

    Press the button on an armrest.

In a forward dividing armrest it is possible to place no more than two bottles of drink.

Coasters in a back dividing armrest

Coasters in a back dividing armrest

Opening of coasters

 PERFORMANCE ORDER

    For opening press a symbol (A).

Installation of the holder

For installation of the corresponding holder (B) deblock it in pressing in the direction of an arrow and at the same time adjust situation.

So adjust position of the holder that it densely adjoined to drink.

In a dividing armrest it is possible to place no more than two bottles of drink.

Ashtrays

Forward ashtray

Central console: open ashtray

Ashtray opening

 PERFORMANCE ORDER

    Press a forward level of an ashtray (A).

Insert extraction

 PERFORMANCE ORDER

    Take an insert (B) for lateral deepenings and take it up.

Insert installation

 PERFORMANCE ORDER

    Establish an insert in a nest in pressing.

Back ashtray

Ashtray opening

 PERFORMANCE ORDER

    Open a cover.

Insert extraction

 PERFORMANCE ORDER

    Take the case for an open cover and take up.

Insert installation

 PERFORMANCE ORDER

    Open a cover of an insert and press an insert against the stop in a nest.

Lighter and sockets

Lighter

Located in a lighter nest the socket on 12 volts can use for connection of additional electrodevices.

Lighter of the central console

Using lighter

 PERFORMANCE ORDER

    For opening of a cover of the lighter press the marked place. The lighter turns on an utaplivaniye of the boss. Wait pushing out of the boss. After that at once take the lighter from a nest. Light a cigaret from the heated heating spiral of the lighter. Establish the lighter in a nest.

Use as the socket

 PERFORMANCE ORDER

    For opening of a cover of the lighter press the marked place. Take the lighter. Establish the electrodevice tip in a lighter nest.

Located in a lighter nest the ordinary socket on 12 volts can use for connection of additional electrodevices with power consumption no more than the 100th watt.

Use only suitable tips not to damage the socket.

Remember that at the idle engine and the included consumers of the electric power there is an accumulator category.

Socket

The socket on 12 volts can use for connection of additional electrodevices.

Fragment of a lateral covering of a luggage carrier: the socket on 12 volts

 PERFORMANCE ORDER

    For access to the socket press a cover. Establish the electrodevice tip in the socket.

The socket is calculated on electrodevices with power consumption no more than the 100th watt.

Apply only suitable tips not to damage the socket.

Remember that at the idle engine and the included consumers of the electric power there is an accumulator category.

Niches

List of niches

In various places of the car there is a set of niches.

In your car there are following niches:

    First-aid kit (In case of emergency) Sign of an emergency stop (In case of emergency) Ware box (coolings of a ware box, CD changer) Case of the central console Niche for folder storage with car documents Niches of doors Крючья for clothes (hanger) Niche for storage of audiocassettes Ware shelf (Seats and niches) Niche of a lateral covering of a luggage carrier (Seat and niche)

Some of the given niches enter into a complete set of only certain updatings or are established to order.

Ware box

The ware box can be locked, and at an open cover illumination of a box joins.

Opening of a ware box

 PERFORMANCE ORDER

    Pull the handle located in a cover in the direction of an arrow and open a cover down.

Closing of a ware box

 PERFORMANCE ORDER

    Close a cover that it was fixed.

Illumination of a ware box joins during the opening of a cover and the included headlights / lay fires.

In a cover of a ware box there are clamps for fastening of writing-materials.

CD changer *

The CD changer of radio system is in a ware box. The description is provided in the corresponding operation manual.

The refrigerator in a ware box

The cooling effect of the refrigerator is reached only in a mode of cooling of the conditioner.

Ware box with the open refrigerator

 PERFORMANCE ORDER

    Open a ware box. Open the refrigerator. Cooling joins/is switched off by the rotary switch (A).

The cooling effect of the refrigerator is reached only at included in a cooling mode the conditioner. At operation of the conditioner in a heating mode the refrigerator is recommended to be switched off.

Located in the refrigerator «the antisliding rug» can be taken and used for cleaning.

Case

Case of the central console

 PERFORMANCE ORDER

    For opening press a cover. For closing push a case completely back till fixing.

In the central console near the hand brake there is one more compartment. On cars with system навигации* in this compartment the control panel is located system.

Niche for folder storage with car documents

Always store the folder with car documents in the niche intended for this purpose.

Niche in facing of doors

In internal facing of doors niches are located.

Hangers (крючья for clothes)

Over each of back doors the hook for clothes is located.

Niche for audiocassettes

Audiocassettes can be stored (without cases) in the sliding compartments which are cleaning in a niche intended for them.

Niche for cartridges of the central console

 PERFORMANCE ORDER

    For opening of a compartment press the button. The cartridge lay in a compartment the open party up. For closing push a compartment completely back till fixing.

When finding the cartridge in a compartment on the left side of a compartment there is a red label.

Blocking of coils prevents spontaneous unwinding of a tape and by that its deformation.

Ware boxes of forward seats

From the face party of each of forward seats there is a sliding ware box.

Opening

 PERFORMANCE ORDER

    Raise the handle of a box and nominate him.

Closing

 PERFORMANCE ORDER

    Completely insert a box till its fixing.

The maximum loading of a box makes 1 kg.