Audi A4, S4

since 2000 of release

Repair and car operation

Audi A4, S4
+ Introduction
+ Governing bodies and receptions of safe operation
+ Current leaving and service
+ Engine
+ Systems of cooling, heating and air conditioner
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling, power shafts and differential
+ Brake system
- Suspension bracket and steering
   Security measures at work
   + Suspension bracket of forward wheels
   + Suspension bracket of back wheels
   - Corners of installation of wheels of the car
      Corners of installation of wheels of the car - the general information
      Conditions of check of corners of installation of wheels
   + Steering and safety cushions
+ Body
+ Onboard electric equipment


Conditions of check of corners of installation of wheels

Check of corners of installation of the car demands existence of a viewing hole or the special measuring lift. At carrying out measurement it is necessary to satisfy the following conditions:

    Pressure of air in tires corresponds to the set. Forward wheels are put directly. The car is not loaded, the fuel tank is completely filled. Suspension brackets of the car were with force осажены. The steering is adjusted. Lyufta in connections of steering drafts lie within the admissible. Lyufta in connections of a suspension bracket lie within the admissible. Depth of drawing of a protector of tires of one axis is identical.